Will add Reflactions From ARMA

Description
To install, extract this archive to your Operation Flashpoint
directory. Run dxdll/configurator.exe to configure, or edit
the dxdll/config.cfg file with a text editor.

Note! Do NOT copy the d3d8.dll into your windows system
directory, doing so will break Direct3D from your system!

Dxdll adds various effects to OFP, including postprocessing
effects, reflective water and other enhancements.

Postprocessing effects include hard light effect, desaturation
effect and glare effect. For more information run the configu-
rator. All postprocessing effects require a video card with
at least pixel shader v1.1 support. Water reflections require
environmental bumpmampping and render to texture support.

Most effects and settings can also be changed with various
in-game shortcuts, press the application key and 'H' while
playing for more information. When changing settings in-game,
they are not saved into the configuration so if you want to
do permanent changes you need to edit the configuration.

Note that due to the way the DLL works, it is likely that
there are compatibility problems with some video cards. If you
encounter problems, try these procedures:
- Disable some effects from the DXDLL configuration
- Make sure HW T&L is enabled from OFP Preferences
- Make sure multitexturing is enabled from video options
- Try increasing the texture size settings from OFP Preferences
- Try changing to 16bit or 32bit color
- Decrease the hardware acceleration setting from windows display properties
- Make sure you have the latest drivers installed for you video card

To uninstall dxdll, remove the d3d8.dll file from OFP directory.